Specification
| Product code | MIK120023 |
| General | |
| Warranty | 2 years |
| WRAS | WRAS-approved product (2307805) |
| Conformity certification | UKCA, CE |
| Performance | |
| Cold fill pressure - max | 4.7 bar |
| Inlet pressure - max | 5 bar |
| Flow rate - nominal | 14 l/min (at 2 bar) |
| Electrical | |
| Power supply (Vac/Ph/Hz) | 230 V a.c. / 1 / 50 Hz |
| Current - full load | 1.0 Amps |
| Current - starting | 1.0 Amps |
| Fuse rating | 3 Amp |
| BMS Relays - max load | 5 Amps |
| Connections | |
| Cold water inlet | 15 mm Compression |
| System outlet | 15 mm Compression |
| Drain (via tundish) | ¾" BSP |
| Dimensions | |
| Height | 270 mm |
| Width | 250 mm |
| Depth | 112 mm |
| Weight - dry | 5.0 kg |
More Features
- Fill volume indicator – Aids water treatment calculation
- Large colour screen display – Clear and concise instructions
- Pre-commissioned packages available – No onsite commissioning required when sold as a package
Unlike ‘pump type’ pressurisation units the Mikrofill 3 is a ‘pumpless pressurisation unit’ and is designed to be connected directly to a building’s incoming mains/boosted water supply and fill a heating or chilled water system without the use of a pump.
The Mikrofill 3 is the most energy-efficient unit of its kind consuming as little as 10 watts/hr on standby and 30 watts/hr fully operational.
The Mikrofill 3 pumpless pressurisation unit incorporates:
- Fluid Risk Category 4 backflow prevention
- The ability to fill directly from mains/boosted water supply any LTHW or CHW system from empty
- Comprehensive electronic pressure management
Pre-commissioned packages are available which include the Mikrofill 3 with appropriately sized vessels and service drain valves.
