News

THE MIKROVENT main image
 

THE MIKROVENT

(LOW LOSS HEADER/AIR DIRT SEPERATOR)

As low pressure hot water/chilled water enters the Mikrovent, the reduction in velocity caused by the Mikrovent's larger diameter ensures that any solid debris carried around the system precipitates out and can be removed periodically from its drain point. 

As water impinges on the spiral wound brushes a low pressure area is created behind each filament of the brush. This forces any dissolved gases to be released. The use of two removable stainless steel brushes ensures that any main system dissolved gases are removed by the lower brush, whilst gases entrained in the primary boiler system are released by the upper brush. These gases then rise to the top of the unit and are expelled by the automatic air vent.

The Mikrovent headers are available to suit connected loads of 250, 400, 750, 1000, 1500 and 2000kw.

To find out more about the Mikrovent contact the sales team on 08452 606020 or visit www.mikrofill.com
 
 
 
 

BACK TO NEWS