Specification
| General | |
| Warranty | 2 years |
| Approvals | CE |
| Features | |
| System capacity | Up to 6,000 litres |
| Mounting | Wall mount |
| Pump control system | Yes |
| Intelligent control interface | Yes |
| System fill mode | - |
| Dry run protection | Yes |
| Typical noise | 60 dB(A) |
| Materials | |
| Break tank | Polyethylene |
| Front cover | Acrylic capped ABS |
| Performance | |
| Maximum fill pressure | 3.0 bar / 300 kPa |
| Maximum flow | 1 l/min |
| Maximum inlet pressure - tank fill valve | 7 bar / 700 kPa |
| Maximum working pressure | 6 bar |
| Ambient air temperature | Min 4°C / Max 40°C |
| Relative huMIDIty | 95 % non-condensing |
| Min./Max. water temperature | Min 4°C / Max 23°C |
| Water tank | |
| Usable water capacity | 2 litres |
| Inlet valve and fill rate | Torbeck (side entry) 12 l/min |
| Fluid category | CAT 5 (type AB air gap with weir) |
| Connections | |
| Cold water inlet | G ½ M |
| Cold water outlet | 15 mm compression x 600 mm flexible hose |
| Overflow | G ¾ (19 - 23 mm diameter pipe compression fitting) |
| Pump | |
| Number of pumps | 1-2 |
| Pump mode | Duty / Duty-standby |
| Pump type | Piston |
| Motor type | Solenoid |
| Duty rating (unit) | Int 30 mins on / 30 mins off (S3) / Continuous (S1) |
| Pump head and seal | PA66 / POM NBR |
| Electrical | |
| Power supply (Vac/Ph/Hz) | 230 V a.c. / 1 / 50 Hz |
| Power consumption - P1 | 100 Watts |
| Current - full load | 0.5 Amps |
| Fuse rating | 5 Amps |
| Power cable length | 1.5 metres (pre-wired) |
| Alarm output | Single |
| Physical | |
| Enclosure protection | IPX4 |
| Width | 293 mm |
| Depth | 145 mm |
| Height | 403 mm |
| Weight - including fittings | 3.6-4.2 Kg |
| Weight - filled | 6.6-7.2 Kg |
| GTIN 13 DIGIT | 5050400467199 / 5050400467205 |
Model Options
More Features
- Digital control system and LED display
- Automated system top-up
- Easy to install and set up
- High flow, Kiwa-approved fill valve
- Category 5 backflow protection, Type AB air gap, weir overflow and warning pipe
- Outlet configurable for left or right connection with flexible hose (supplied)
- 2-year warranty
The Mikrofill MINI is a compact yet highly efficient pressurisation unit, engineered for domestic and light commercial sealed systems. Whether used for heating systems, chilled water systems, refrigeration units, or industrial cooling, the Mikrofill MINI delivers exceptional pressure control with ease.
Housed in a robust, compact enclosure designed for wall mounting, the MINI is remarkably easy to install and commission. Despite its small size, it offers a 3.0 bar cold fill pressure and a 2-litre tank capacity, making it ideal for systems of up to 6,000 litres.
Equipped with an advanced digital control system and automated top-up features, the MINI guarantees precise and reliable operation. The unit also includes a high-flow, Kiwa-approved fill valve, ensuring efficiency and dependability in every installation.
Perfect for maintaining pressure in heating, cooling, and industrial applications, the Mikrofill MINI ensures consistent, low-maintenance performance, making it the go-to choice for smaller-scale sealed systems.
